







Free design consultation - KraftMaid and Wellborn cabinet lines, Cambria and Silestone surfaces, and every tier from refacing to full custom laid out side by side
Trusted Countertop Installation for Las Vegas Homeowners
Countertop installation in Las Vegas typically runs $1860 – $6045, and the number that matters most isn’t the slab price. It’s whether the template is right, the seam lands where you want it, and the sink cutout lines up with the cabinet box underneath. Get any of those wrong and a beautiful piece of quartz becomes an expensive problem. We’re a kitchen-only specialist, which means countertop installation is not a side job for us. Our technicians have up to 9 years of experience and work with Cambria, Silestone, and Caesarstone as a curated set of premium quartz lines. Free estimates, written line-item quotes, and one accountable contractor from cabinet box to countertop edge. Call (844) 797-6597 to schedule yours.
What Our Countertop Installation Service Includes
Countertop installation is more than dropping a slab on a cabinet run. Here’s what the work actually covers when we take it on in Las Vegas, broken into the pieces that decide whether the finished kitchen feels solid.
Template, Fabrication, and Fit
Every countertop project starts with a physical template taken after the cabinets are set and leveled, not before. That’s the step that catches out-of-square walls, an uneven cabinet run, or a sink that sits a half-inch off center. If you’re replacing counters over existing cabinets, we check that the boxes are flat and secure first, because a stone counter over a twisted base will crack at the seam over time. We handle the template through fabrication to final set, so there’s one point of contact when a measurement question comes up.

Quartz Surface Installation
Quartz is the dominant surface choice in Las Vegas kitchens for good reason: it doesn’t need sealing, it handles heat and daily traffic, and the color runs consistent from slab to slab. We install Cambria, Silestone, and Caesarstone, which means you compare the three premium quartz lines in one conversation instead of driving between vendor showrooms. Each brand has a different edge profile menu, slab thickness range, and vein pattern, and we’ll walk you through how each one reads against your cabinet finish.

Sink and Fixture Coordination
A countertop cutout is only as good as the sink that goes into it. We work with Kohler, Moen, and Blanco sinks and fixtures so the undermount, the faucet spacing, and the countertop edge are planned as one detail, not three separate guesses. If you’re changing sink size during a remodel, the cutout has to be templated to the new basin, which is why we confirm the sink model before fabrication. Leaving that coordination to two different trades is how you end up with a cutout that doesn’t match the basin.

Removal and Disposal of Old Surfaces
Taking out an old laminate or tile counter is part of the job, and it’s messier than people expect. We remove the existing surface, protect the cabinet boxes underneath, and haul the old material away so you’re not left with a pile in the garage. If the old counter hides water damage or a soft cabinet top rail, we flag it before the new top goes down rather than covering a problem.
Seaming, Edge Profiles, and Backsplash Transition
Long runs usually need a seam, and where that seam lands is a design decision as much as a structural one. We plan seam placement away from the sink and the primary sightline, match the edge profile to your cabinet style, and set the counter so a backsplash ties in cleanly at the wall. Those small decisions are what separate a counter that looks installed from one that looks built in.
Styles & brands we work with
- Shaker
- Modern flat-panel
- Two-tone cabinets
- KraftMaid
- Cambria quartz
- Butcher block
- Open shelving
Brands We Service for Countertop Installation
We work with Cambria, Silestone, and Caesarstone as our quartz surface set, and that focus is deliberate. Knowing three brands deeply beats knowing twenty brands superficially. Cambria brings a tight, consistent quartz line with a strong design catalog and predictable slab-to-slab color, which matters when you’re matching a large island to a perimeter run. Silestone offers a wide range of veined and solid looks with strong stain resistance, and its slab sizes suit the longer counter runs common in Las Vegas kitchens. Caesarstone rounds out the trio with classic and marble-look quartz that holds up to daily use without sealing.
We pair those surfaces with KraftMaid and Wellborn cabinetry, so the countertop specification is chosen against the cabinet finish and layout you actually have. That’s the advantage of a kitchen-only contractor: the surface, the cabinet box, and the sink are planned together by the same team. Whether you have Cambria, Silestone, or any other quartz make, we can help you plan the installation and get the fit right.
Signs You Need Countertop Installation Right Now
- Cracks or chips at the edge or seam. A crack at a seam or along the front edge usually means the base has shifted or the seam wasn’t set right. Left alone, it spreads, and a spreading crack in stone is a replacement, not a patch.
- A wobbling or hollow-sounding countertop. If the counter rocks when you lean on it or sounds hollow when tapped, the cabinet top rail may be uneven or soft. That has to be fixed before any new surface goes down, or the new counter inherits the same problem.
- Stains or burn marks that won’t lift. Laminate and older surfaces hold stains and scorch marks that no cleaner will remove. Once the surface is compromised, replacement is usually the cleaner answer than a resurfacing job.
- A sink that’s pulling away from the counter. An undermount sink that’s separating from the underside means the mounting has failed, and water is getting into the cabinet below. That’s a countertop and sink coordination job, not a quick re-caulk.
- You’re remodeling the kitchen anyway. If cabinets are being replaced, the countertop has to come off and be re-templated to the new layout. Trying to reuse an old top over new boxes almost never fits.
Our Countertop Installation Process – Step by Step
- 1
Free in-home estimate and measurement review. We look at the existing layout, check cabinet level and condition, and talk through surface options and edge profiles. You get a written line-item quote, so you can see what each part of the job costs before anything is ordered.
- 2
Surface and sink selection. We walk you through Cambria, Silestone, and Caesarstone options against your cabinet finish, and confirm the Kohler, Moen, or Blanco sink and fixture so the cutout is planned correctly. This is where the design gets locked, not later.
- 3
Physical template after cabinets are set. Once the cabinet boxes are installed and level, we template the actual counter run. Out-of-square walls and uneven cabinet tops get caught here, before fabrication, which is far cheaper than catching them after.
- 4
Fabrication to the template. The slab is cut to the template with the sink cutout and edge profile you chose. Seam placement is planned in this step, away from the sink and main sightline.
- 5
Installation, seam set, and final check. We set the counter, join the seams, mount the sink and fixtures, and check level, fit, and backsplash transition. You walk the finished kitchen with us before we call it done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Countertop Installation Cost in Las Vegas?

A typical countertop installation in Las Vegas runs $1860 – $6045 depending on surface brand, square footage, edge profile, seam count, and whether the sink and fixtures are being replaced at the same time. Smaller runs over existing cabinets usually land toward the lower end. A full kitchen with an island, a new undermount sink, and a premium quartz line with a complex edge profile sits toward the upper end.
| Scope | Typical Estimated Range |
|---|---|
| Countertop installation (this page) | $1860 – $6045 |
| Cabinet installation | $3720 – $12090 |
| Kitchen island installation | $2790 – $9300 |
| Backsplash installation | $745 – $2325 |
| Kitchen remodel (full) | $13020 – $41850 |
What affects the price: the quartz brand and slab you choose, the total square footage including island and perimeter, whether the counter is L-shaped or needs multiple seams, the edge profile, and whether plumbing fixtures are being changed. How to avoid overpaying: get a written line-item quote that separates surface, fabrication, and installation, and confirm the sink model before fabrication so you’re not paying for a re-cut. Your free estimate includes the surface review, the template plan, and a written quote; the written estimate sets the final price.
Countertop Installation Near Las Vegas – Our Service Area
We install countertops across the valley, with regular work in Summerlin, Spring Valley, and Las Vegas. Jobs in Winchester, North Las Vegas, and Paradise are a short trip from most of our work. Scheduling depends on template and fabrication timing; reach out and we’ll confirm available dates. Learn more about our kitchen work at Valor Kitchen Remodeling.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Countertop Installation in Las Vegas

Countertop installation is the process of templating, fabricating, and setting a new counter surface over your cabinets, including the sink cutout and edge profile. It covers removing the old surface, planning seams, and coordinating the sink and fixtures so everything fits together. We handle the full sequence as one job rather than handing off between trades. Call (844) 797-6597 for a free estimate.
Most countertop installations take one to two weeks from template to final set, depending on fabrication queue and sink coordination. The physical install day itself is usually a single day for a standard kitchen run. Complex islands or multiple seams can add time. We’ll give you a realistic timeline in your written estimate.
Countertop installation in Las Vegas typically runs $1860 – $6045 depending on surface brand, square footage, edge profile, and whether the sink is being replaced. Cambria, Silestone, and Caesarstone pricing varies by slab and pattern. The written estimate sets the final price, with no change orders mid-job. Call (844) 797-6597 for an exact quote; estimates are free.
Yes, we install Cambria, Silestone, and Caesarstone as our premium quartz surface lines. That focus lets you compare the three in one conversation and pick the brand and pattern that matches your cabinets. We’ll walk you through edge profiles and slab options for each. Call (844) 797-6597 to talk through your selection.
Same-day service is available depending on schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (844) 797-6597 to check availability.
Workmanship is backed by a written commitment in your estimate, and the quartz brands carry their own product warranties. We’ll spell out both in the quote so you know exactly what’s covered and for how long. Ask for the warranty terms with your free estimate. Call (844) 797-6597 to review the details.
Clear the countertops, empty the base cabinets where the sink and plumbing are accessed, and plan to be without a working sink for part of install day. If cabinets are new, they must be installed and level before we template. We’ll give you a short prep checklist with your scheduled date. Call (844) 797-6597 to get booked.
Schedule Your Countertop Installation Service in Las Vegas Today
Ready to get a countertop that fits right the first time? Call (844) 797-6597 for a free, no-obligation estimate on countertop installation in Las Vegas. We’ll review your surface options, check the cabinet base, and give you a written line-item quote. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One contractor, cabinet box to countertop edge.
Written by the team at Valor Kitchen Remodeling.










